Stainless Steel Freight/Goods Elevator with Good Quality and Large Space

• After-sales Service: with
• Warranty: 6 Months
• Type: Wellhole
• Load Capacity: 6300~10000kg
• Speed: 0.25~2.0m/S
• Drive Mode: AC
• Model NO.: Freight Elevator
• Open & Close Type: Automatic
• Lift Mechanism: Lift Chain
• Deceleration Device: Without Deceleration Device
• Guide Rail: Hollow Guide
• Elevator Door: Sider Door
• Door Knife: Double
• Attendant: Without Attendant
• Pit Depth: 1500mm
• Overhead Height: 4200mm
• Door Open Type: Two Panel Side Opening
• Transport Package: Container
• Trademark: Sunny
• Origin: China
• Production Capacity: 500 Set/ Year

Product Description

Stainless Steel Freight/Goods Elevator with Good Quality and Large Space

Freight Elevator
1.AII the constructions in the shaft should be fireproofing. Extra holes Such as equipments and power which have nothing to do
with elevator are forbidden.
2.Shall should be vertical and the horizontal size should be the minimum clearance size. The vertical error should more than…
3.if the space below the bottom of pit can be reached. counterweight buffer should be fixed in the firm center of pit, or please ask
the elevator manufactor for the installation of counterweight safty gear.
4.Before the installation, all the landing door halls should have at least 1.2 meter safe guard fence. And the strength should be
confirmed.
5.Enclosed shaft should set airventilators according to the requests(generally in the top and bottom of the shaft). The size should
not less than 1% of horizontal area of the shaft. And protective nets are needed.
6.After the finish of installation. elevator hall doors. hall indicators reserved holes and other reserved holes should be filled.
7.Shaft preferably is reinforce concrete construction. lf the shaf is frame construction. we should install reinforce concrete beam
300mm tall and as wide as shaft at guide rail bracket. If the construction is solid load bearing brick wall, we need to install the
same beam on the top and bottom of hall doors reserved holes.
8.When the distance between two neigbouring door sills surpass 11 meters. we need to set a safty door opened to maintainers
only. The size should not less than 350mm width and 1800mm height.
9.Pit should be waterproof, if plash is needed, set it in the corner.
10.According to the requests of technical parameter, to pull power supply into machine room, install protective switch and lock. The
wave range should not surpass±7%. Zero line and earthing cabIe should be separated. And ground impedance value should no
more than 4.
11 .The temperature in machine room should keep to 5-40 degree. Machine room should be plate and can bear at least 7.0KN/sq.
m. When the floor in machine room is uneven and the discrepency is more than 500mm, stair or footstep with guardrail is needed.
12.User should set rescue dutyroom and lay one six wicks wire for every machine room(we recommend). The wick should be 0.75
square millimeter at least.

Freight elevator specifications

Load (kg)	speed (m/s)	Exterior size of car width X depth X height (mm)	Net door opening width X height (mm)	Shaft Net Size			Machine Room Net Size		Door Open type
				width X depth (mm)	Overhead height	Pit depth	width X depth (mm)	height (mm)
6300	0.5	1200x1500x2200	1100X2100	2100X1860	4200	1500	2500X3000	2200	Two panel side opening
1000	0.5	1500x1800x2200	1200X2100	2250X2160	4200	1500	3000X3000	2200	Two panel side opening
2000	0.5	1570x2900x2200	1500X2100	2700X3260	4200	1500	3500X3000	2500	Two panel side opening
	1.0				4500	1500
	1.5	2000x2300x2200		2850X2660	4500	1600			Four panel center opening
	2.0				4800	1800
3000	0.25	2070x3050x2200	1800X2100	3300X3410	4500	1500	3800X4200	2500	Four panel center opening
	0.5
3200	1.0	2070x3100x2200	1800X2100	3300X3460	4500	1500	3800X4200	2500	Four panel center opening
5000	0.25 0.5	2800x3400x2500	2000X2200	4200X3800	5000	1600	4200X3800	2800	Four panel center opening
7000	0.25 0.5	3000x4200x2500	2600X2400	4500X4600	5000	1600	4500X4600	2800	Four panel center opening
10000	0.25	3070x5760x2500	2600X2400	4900X6200	5000	1600	4900X6200	2800	Four panel center opening

Freight Elevator Construction Layout Drawing

Our factory







Delivery


About us

Why choose us?
Shanghai Sunny Elevator Co., Ltd, founded in 1992, is a 30-year professional manufacturer specializing in designing and producting Opto-Electro-Mechanical products.
Sunny Elevator has started import and export since 2012.
We have experience in exporting all kinds of elevator parts and complete elevator to 80 countries all over the world.